Used car inspection checklist: what to check before you buy
A practical checklist for inspecting a used car in person: bodywork, rust, tyres, fluids, cold start, the test drive, electronics, and when to pay for a professional inspection.
By the WYG team · 9 min read · Last reviewed 10 November 2026
Before you go
Do your homework first. Know the model's common problems, check the vehicle history with its identification number, and agree a time to view the car in daylight and dry weather, because rain hides paint flaws and darkness hides almost everything. Ask the seller not to warm up the engine before you arrive, so you can see a cold start.
Bring a torch, a magnet or a thickness gauge if you have one, paper towels, and a friend. A second pair of eyes is valuable, and a friend makes the meeting safer.
Walk around the outside
- Panel gaps: they should be even from side to side. Uneven gaps suggest accident repair.
- Paint: look along the side of the car in the light for ripples, differing shades between panels and fine overspray on rubber seals, trim and window edges.
- Rust: check the sills, wheel arches, door bottoms, bonnet and boot edges, and the area around the windscreen. Surface bubbling is a warning, and holes are serious.
- Glass: chips and cracks in the windscreen, and whether all the glass carries the same manufacturer markings (a mismatched window can indicate a repair).
- Lights: no cracks or condensation inside the lenses, and all of them working.
Tyres and brakes
- Tread depth should be even across each tyre. Wear on only the inside or outside edge points to alignment or suspension problems.
- Look at the date code on the sidewall. A four-digit number shows the week and year, and tyres older than about six years are ageing even if the tread looks fine.
- Four matching tyres of a decent brand suggest an owner who maintained the car. A mix of cheap brands suggests the opposite.
- Brake discs should not have a large lip at the edge or deep grooves, and the pads should have material left.
Under the bonnet (engine cold)
- Oil: pull the dipstick. The oil should be clean amber to dark brown, not thick black sludge, not milky and with no metallic glitter.
- Coolant: the reservoir should be the right colour and level, not rusty or oily. A milky film under the oil filler cap can mean a head gasket problem.
- Look for leaks, wet patches or fresh oil around the engine, hoses and under the car.
- Check belts for cracks and the battery terminals for corrosion.
- Look for a tidy engine bay with consistent wear. A freshly pressure-washed engine bay can hide leaks, and an unusually dirty one can show neglect.
Inside the car
- Wear should match the mileage. A badly worn driver's seat, steering wheel and pedals on a car claiming low mileage is a warning.
- Smells: damp, mould or a sweet smell can mean water leaks or a leaking heater core.
- Test everything that has a switch: windows, mirrors, air conditioning (cold and hot), heater, radio, central locking, wipers, seat adjustments, sunroof, cruise control and the parking sensors.
- Warning lights should all come on when you turn the ignition on and go out after the engine starts. A light that never comes on may have had its bulb removed to hide a fault.
- Lift the carpets and check the boot floor and spare-wheel well for damp, rust or rear-end repair.
The cold start
Start the engine from cold, with your foot off the throttle. It should start quickly and settle into a steady idle. Listen for rattles that last more than a second or two, ticking, knocking or a squeal. Look at the exhaust for smoke: white clouds that do not clear can indicate coolant burning, blue smoke means oil is burning, and heavy black smoke means too much fuel. A little condensation steam on a cold morning is normal.
The test drive
- Drive a mix of roads, including a stretch at motorway or highway speed, and at least one rough surface.
- Brakes: the car should stop straight, without pulsing through the pedal, pulling or grinding.
- Steering: it should be straight at speed and not wander, vibrate or make noise at full lock.
- Gearbox: manual cars should have a clutch that bites smoothly and gears that engage without crunching. Automatics should change smoothly and not slip, flare or shudder. Check reverse as well.
- Suspension: listen for knocks, clunks and creaks over bumps. Excess bounce after a bump means worn shock absorbers.
- Acceleration: the engine should pull cleanly with no hesitation, misfire or loss of power. On a turbo car, boost should come in smoothly.
- Turn the radio off so you can hear what the car is telling you.
Plug in a scanner
A basic diagnostic reader costs little and plugs into the car's diagnostic socket. It can show stored fault codes and whether the car's readiness monitors have recently been reset. A clean scan does not prove the car is healthy, but a scan with codes, or monitors that have just been cleared, is a clear warning that the seller may be hiding something.
Check the paperwork
- The vehicle identification number on the car should match the title or registration papers and the history report.
- The seller's name should match the name on the papers.
- Check for finance owing, theft or write-off records using a history service for your country.
- Look for a service book or receipts, and a record of the last timing belt or major service.
- Check how many keys come with the car. A single key can mean extra expense and sometimes a story.
When to pay for a professional inspection
A pre-purchase inspection by an independent mechanic costs a modest amount compared with the price of the car and the cost of the problems it can find. It is especially worth it for cars with high mileage, European performance cars and anything with a complicated gearbox. A seller who refuses an independent inspection is a seller to walk away from. Use the findings to negotiate the price or to decide not to buy.
Let a tool check the numbers
A physical inspection tells you the condition of the car. It does not tell you whether the price is fair, or what is known to go wrong with that engine and gearbox at that mileage. Dyno covers that side: it values the car from live listings, scores the engine and gearbox, lists known weak points with typical repair costs and flags warning signs in the advert, so you know what to look for when you see the car.
Check a car with Dyno
Paste a listing link and get a value range, reliability, known weak points and red flags in seconds. It handles cars and bikes. Three checks are free.
More guides
General information only, not legal, financial or mechanical advice. Prices, rules and what is known about a particular engine or gearbox differ by country, year and version and change over time, so confirm the details for the specific car or bike with an independent inspection and your local authority.
